Page tree
Skip to end of metadata
Go to start of metadata


FDM Printers

Our printers are of the FDM (fused deposition modeling) or FFF (fused filament fabrication) type which use a strand of plastic material which is molten and pressed through a nozzle to finally build up a 3D shape layer-by-layer.

Creality Ender 3 (BLACK and RED)

  • these are smaller versions with almost identical mechanical construction as compared to the CR10
  • purchased in summer 2018 (GOLD, autumn 2020)
  • build-volume is 220mm x 220mm x 250mm
  • filament diameter 1.75 mm
  • nozzle size 0.6 mm

Creality Ender 3 GOLD

To ensure that we always have a working printer in Makerspace, we have an extra Ender 3 as a backup if the other printers need repairs. The GOLD uses the same parameters as Creality Ender BLACK and RED.



Creality CR10 BLUE (not in use)

  • our first printer in the MakerSpace, purchased in November 2017
  • build-volume is 300mm x 300mm x 400mm
  • filament diameter 1.75 mm
  • nozzle size 0.6 mm


  • No labels